Measuring devices
The importance of choosing a good measuring device
Lightning protection systems must ensure optimal and safe operation at all times, so it is necessary to carry out periodic checks.
Measurement devices are essential elements for this correct control and maintenance, helping to prolong the life of these systems and complying with the parameters established by regulations.
Our devices have been designed and developed with the highest quality standards to ensure the proper functioning of the lightning protection installation.
Our devices
The AS TESTER PRO is a high-tech portable measurement device that performs an automatic and complete test of the operation of lightning rods with a priming device. It is valid for all ESEs manufactured by Aiditec Systems, S.L.
| Reference | AS600999 |
| Dimensions | 145 x 95 x 35 mm |
| Weight | 288 gr. |
| Maximum output voltage | 3000 V |
| Lightning rod ignition test | 0.3 mA ± 2% |
| Autonomy | 1000 Test |
| Battery | 3,7 V / 1800 mAh |
| Operating temperature | From -20ºC to +65ºC |
| Complies with: EN 62561-6, EN 50164-6 y UTE C 17-106 | |
The ADT Counter counts and registers the direct impacts and surges of a lightning protection system. Due to its design and materials, it is robust, reliable and autonomous. It does not need an external power supply and is compatible with any lightning rod.
| Reference | AS600920 |
| Dimensions | 89 x 69 x 45 mm |
| Weight | 285 gr. |
| minimum threshold current (Itc 8/20 µs) | 1 kA |
| Withstand and counted current (Imcw 10/350 µs) | 100 kA |
| For round conductor up to | Ø 15 mm |
| For flat conductor up to | 60 x 10 mm |
| Operating temperature | From -20ºC to +65ºC |
| Complies with: EN 62561-6, EN 50164-6 and UTE C 17-106 | |
The ADT eCOUNTER is the advanced digital version of our renowned ADT COUNTER, designed to accurately record every lightning strike received by the protection system. Thanks to its digital technology, it allows for easier, more precise, and accessible reading of recorded events, improving traceability and maintenance of protected installations.
| Reference | AS800921 |
| Type of LSC | Type I: to count impulse discharge current count Type II: to count nominal discharge current count |
| Minimum In on 8/20 waveform | 0,7 kA |
| Maximum In on 8/20 waveform | 70 kA |
| Minimum Iimp on 10/350 waveform | 11,2 kA |
| Minimum Iimp on 10/350 waveform | 100 kA |
| LSC internal circuit | with electronic circuit |
| For flat conductor up to | 60 x 10 mm |
| For round conductor up to | Ø 15 mm |
| Operating temperature | -20ºC … +65ºC |
| Location / Installation | Outdoor |
| Ingress protection against dust and water | IP68 |
| Weight | 320 gr. |
| Dimensions | 80 x 60 x 30 mm |
| Complies with: IEC 62561-6:2023, EN 62561-6:2023 | |
